伊爾耐德（天津）科技有限公司專注于絲錐的修磨服務，具備深厚的技術積累和豐富的實踐經驗。
絲錐修磨的具體工作流程如下：
第一步，收集絲錐相關信息，包括型號、規(guī)格、使用情況等，并對磨損絲錐進行初步外觀檢查。
第二步，采用先進的三坐標測量機對絲錐進行全面檢測，精確獲取各部分尺寸、螺紋精度等關鍵數據。
第三步，依據檢測數據進行分析，制定科學合理的修磨計劃，確定具體的修磨部位和參數。
第四步，將絲錐固定在專業(yè)的磨床上，運用高精度的磨削設備，按照修磨計劃對絲錐的切削刃、螺紋等部位進行精細磨削。
最后，完成修磨后，再次使用測量設備對絲錐進行校驗，確保修磨后的絲錐在螺紋精度、螺距精度以及切削刃的鋒利度等各項指標恢復到標準要求。無論普通絲錐還是特殊類型絲錐，我們都能提供專業(yè)的修磨解決方案，使其重新具備良好的切削性能，顯著降低螺紋加工的難度，提高加工質量和生產效率。
lrnide (Tianjin) Technology Co., Ltd. focuses on tap grinding services and has profound technical accumulation and rich practical experience.
The specific work flow of tap grinding is as follows:
The first step is to collect tap-related information, including model, specification, usage, etc., and conduct a preliminary appearance inspection of the worn taps.
The second step is to use an advanced three-coordinate measuring machine to conduct a comprehensive inspection of the taps to accurately obtain key data such as the dimensions of each part and thread accuracy.
The third step is to analyze the test data, formulate a scientific and reasonable grinding plan, and determine the specific grinding parts and parameters.
The fourth step is to fix the tap on a professional grinder, use high-precision grinding equipment, and finely grind the cutting edge, thread and other parts of the tap according to the grinding plan.
Finally, after the grinding is completed, the measuring equipment is used to calibrate the tap again to ensure that the thread accuracy, pitch accuracy and cutting edge sharpness of the tap after grinding are restored to the standard requirements. Whether it is a common tap or a special type of tap, we can provide professional grinding solutions to restore its good cutting performance, significantly reduce the difficulty of thread processing, and improve processing quality and production efficiency.
1
立即詢價
您提交后，專屬客服將第一時間為您服務